NSW Approved Point of Attachment Brackets

'B' & 'D' RATED SINGLE & DOUBLE LEG BRACKETS

 

Clarke style Point of Attachment Brackets are angle brackets, hot dip galvanised and designed to meet the NSW Service and Installation Rules. For single or three phase aluminium aerial service lines, the 'B' rated (or single leg) POA brackets are suitable for up to approx. 30m length of aerial run whilst the 'D' rated (or double leg) brackets will take up to approx. 50m. The 'D' rated POA brackets are also suitable for any service line pulling on the bracket at an angle of greater than 45° to the perpendicular.

 

There are two mounting styles POA brackets available, rafter or fascia. The rafter POA brackets are designed to be fixed to rafters behind a fascia board and flashed around penetration through roofing material. The fascia style brackets is fixed to the fascia under the gutter. These premiun quality POA brackets are available in a variety of sizes; ranging from 300-900mm high.

 

For exact details regarding required bracket strength ratings for particular applications, please refer to the New South Wales Service & Installation Rules, your local Supply Authority or Service Provider.

 

Clarke 'B' Rated Fascia Bracket	Clarke 'B' Rated Rafter Bracket

 

Clarke 'D' Rated Fascia Bracket	Clarke 'D' Rated Rafter Bracket